Engineering · Austin, TX

Hybrid Full-time

Microgrid Architect Lead, Power Generation

Fluidstack · Austin, TX · Posted Oct 13, 2026

This posting comes from Fluidstack. Confirm the details on their site before applying.

Overview

Build an islanded grid at gigawatt scale, from a blank sheet. Generation, storage and compute run with no utility behind them, and the machine you design is the only thing holding frequency. No playbook exists at this size, so the architecture you set becomes the reference. Get power online in months, not years. Interconnection queues are measured in years and we do not have them.

Responsibilities

  • Own the design basis. Fix voltage levels, topology, grounding, redundancy boundaries and the repeatable block and cluster unit for the islanded grid, with v1 and the site and block single-lines issued inside six months.
  • Treat the block as a product. Hold one standard design across sites, drive out the variation that turns a repeatable build back into bespoke engineering, and freeze the design early enough that procurement and construction never absorb late change.
  • Write the grid code and hold vendors to it. Set the internal grid code every generator, BESS, inverter and transformer must meet, own the conformance evidence that proves compliance before equipment ships, and own the technical content of equipment specifications and bid evaluation, with v0.1 in…
  • Build the model of record. Produce the first-pass generation, BESS and reserve sizing and the first load flow, short circuit and transient stability results yourself, own the study register and its prioritised roadmap, and accept or reject every vendor and EPC study against it.
  • Set stability, protection and phasing. Define the loss-of-largest-unit contingency, reserve policy and a load shedding scheme with compute as a participating resource, negotiate the load behaviour specification with the compute side, and decide whether the next block can be energised safely at…
  • Close the loop from the field and build the team. Go to site, fold every commissioning finding and installer workaround into the next revision of the standard, and hire the specialists behind you in sequence: protection and HV substation, studies and EMT, and the operations counterpart who will own…

Requirements

  • 10+ years of experience in power system design and studies for islanded or weak-grid systems, including EMT and load flow modeling, protection, and grid-forming inverter integration.
  • You have delivered a real islanded or very weak-grid power system at 100MW or more, on an island or remote utility, a mining or LNG captive plant, an OEM power systems group, or a specialist islanded-systems practice. A grid-tied microgrid is not the same problem.
  • You build the models with your own hands: deep EMT work alongside RMS, and you have personally produced the load flow, short circuit and stability results that decisions were made on.
  • You have designed around grid-forming inverter control and inverter-dominated protection, where there is little or no synchronous machine underneath you to hide behind.
  • You have owned a system design basis that vendors were held to, and you have rejected a vendor or EPC study that did not meet it. You set standards that OEMs and EPCs comply with on technical authority rather than headcount or a title.
  • You have been in the room when an island went dark, and you were the one who had to explain why.
  • You have designed something that got built many times over. You freeze a design, you say no to the change that would have been a small improvement and a large disruption, and you have watched what a late revision does to a supply chain.
  • You spend time where the work happens, and the standards you write are shaped by what installers and operators actually do rather than what the drawing assumed.
  • You're comfortable with regular travel: expect 25% or more, depending on business needs.
  • Most of our engineering team, stakeholders, and work are based in Austin, TX, and we value working in person. We have a strong preference for Austin and run a hybrid model, but we're open to other locations for the right role and candidate.
  • Bonus: ERCOT market and interconnection dynamics. HV substation design at 230kV and above. Professional Engineer licence. Lean practice applied to design and build, including standard work and design freeze discipline.

Benefits

  • Bonus, Commission

Great fits start here.

Whether you're looking for your next role or your next team member, give people and possibilities a place to meet.