Engineering · Phoenix, AZ

Full-time

Welding Engineer / AWS D1.1 CWI

Fluidstack · Phoenix, AZ · Posted Jul 17, 2026

This posting comes from Fluidstack. Confirm the details on their site before applying.

Overview

Write and qualify welding procedure specifications and procedure qualification records to AWS D1.1 for the structural and pressure-boundary welds in modular data center assemblies. Inspect and certify welds across the manufacturing line, signing off on the work an AHJ or auditor will not accept without a qualified inspector. Build the weld quality program for a factory producing data center modules at rate, setting the acceptance criteria, NDE requirements, and first-pass-yield targets.

Responsibilities

  • Write and qualify welding procedure specifications and procedure qualification records to AWS D1.1 for the structural and pressure-boundary welds in modular data center assemblies.
  • Inspect and certify welds across the manufacturing line, signing off on the work an AHJ or auditor will not accept without a qualified inspector.
  • Build the weld quality program for a factory producing data center modules at rate, setting the acceptance criteria, NDE requirements, and first-pass-yield targets.
  • Qualify welders and welding operators, and stand up the continuity and requalification tracking that keeps the whole line certified.
  • Drive down weld defect and rework rates by root-causing failures on the floor and feeding fixes back into procedures and fixturing.

Requirements

  • The below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would.
  • You hold a current AWS Certified Welding Inspector (CWI) credential and have signed off on structural or pressure welds to AWS D1.1 or an equivalent code.
  • You've written and qualified WPS and PQR documentation for production welding, not just reviewed someone else's.
  • You've stood up or run a weld quality program in a manufacturing or fabrication environment producing at rate.
  • You've qualified welders and managed the continuity records that keep a line's certifications valid.
  • You root-cause weld defects on the floor and close the loop by fixing the procedure, the fixture, or the training, so the same defect doesn't come back.
  • You read a weld map and a fabrication drawing and catch the problem before the first arc strikes.
  • Bonus: ASME Section IX or B31 piping. NDE certifications (UT, RT, MT, PT). High-volume or modular fabrication. Robotic or automated welding. Data center or mission-critical infrastructure fabrication.
  • Work in non-climate-controlled environments, including active construction areas, data halls, electrical and mechanical rooms, and outdoor spaces. Temperatures can be high or low, and conditions can be humid, loud or dusty.
  • Lift, carry, push and pull up to 40 pounds on your own.
  • Sit, stand, walk, kneel, bend and crouch for long periods, including full shifts on your feet.
  • Wear the required personal protective equipment (PPE), such as hard hats, safety glasses, steel-toed boots, gloves and hearing protection, and follow site safety rules.
  • Climb stairs and ladders, and move around equipment, cable trays and uneven surfaces.

Benefits

  • Bonus

Great fits start here.

Whether you're looking for your next role or your next team member, give people and possibilities a place to meet.