Engineering · Remote

Senior Propulsion Development Engineer, Test Stand

True Anomaly · Remote · Posted Oct 5, 2026

This posting comes from True Anomaly. Confirm the details on their site before applying.

Overview

As a Senior Propulsion Development Engineer at True Anomaly, you will be the hands-on design and build lead for the ground systems and facility infrastructure that make our new Denver Front Range propulsion test stand operational. You will create detailed designs for hypergolic propellant feed systems, GSE, fluid system plumbing, structural hardware, and supporting facility systems — then see those designs through fabrication, installation, and commissioning.

Responsibilities

  • Lead the detailed mechanical design of hypergolic propellant feed systems, including propellant storage vessels, transfer lines, fill and drain assemblies, valve configurations, and pressurization circuits for a new test stand.
  • Select fluid system components and assemblies compatible with hypergolic propellants (NTO, MMH, UDMH, or similar), including sizing, material selection, seal compatibility, leak containment, and pressure ratings.
  • Develop and own P&IDs for hypergolic propellant and pressurant systems; ensure designs incorporate appropriate redundancy, isolation, and emergency safing capabilities.
  • Design propellant offload, storage, and transfer infrastructure including secondary containment, vent and drain routing, and neutralization provisions.
  • Integrate hypergolic system designs with fire suppression, facility exhaust and scrubbing systems, personnel protection provisions, and facility control interfaces.
  • Apply and enforce applicable design standards and material compatibility requirements throughout all hypergolic system designs.
  • Design the primary test stand structure including thrust measurement systems, engine/thruster mount interfaces, and load paths for anticipated thrust levels and dynamic loads.
  • Detail mechanical designs for run tank assemblies, GSE carts, propellant conditioning systems, and ancillary facility hardware.
  • Produce fully detailed CAD models and engineering drawings suitable for fabrication, procurement, and third-party review.
  • Conduct or coordinate structural and pressure system analyses including FEA, pressure budget calculations, and proof and burst margin verification.
  • Design for maintainability, access, and operational safety — ensuring that technicians can safely configure, operate, and service all systems.
  • Develop fabrication packages including drawings, material specifications, weld and joining requirements, and acceptance criteria for test stand hardware.
  • Identify and qualify vendors for fabricated components, pressure vessels, specialty valves, instrumentation, and other long-lead hardware; provide technical oversight throughout procurement.
  • Support and oversee the fabrication, assembly, and installation of designed systems; resolve fabrication anomalies and nonconformances.
  • Define and execute acceptance test requirements for delivered hardware, including proof pressure testing, leak checks, and functional verification.

Requirements

  • Bachelor's degree in Mechanical, Aerospace, or Chemical Engineering.
  • 8+ years of professional experience in the design and build of propulsion ground systems, test facility hardware, or high-pressure fluid systems for aerospace or defense applications.
  • Demonstrated hands-on experience designing fluid systems for hypergolic, toxic, or highly reactive propellants, including material compatibility, secondary containment, and emergency safing provisions.
  • Proficiency with 3D CAD tools (NX, SolidWorks, or equivalent) and production of fully detailed engineering drawings for fabrication.
  • Experience developing P&IDs for propulsion or chemical process systems and working with pressure system design codes (ASME B31.3 or equivalent).
  • Solid understanding of pressure system safety requirements including proof, burst, and leak test margins, and relief device sizing.
  • Demonstrated ability to take a design from concept through fabrication, installation, and commissioning.
  • Excellent written and verbal communication skills, including the ability to produce clear technical documentation and interface with safety and regulatory stakeholders.
  • Work Location—this role will be fully onsite at either our Centennial, CO office location.
  • Remote-For exceptionally qualified candidates who live outside a reasonable commuting distance of our Centennial or Long Beach offices, remote work within the U.S. may be considered on a case-by-case basis, subject to business needs and approval.
  • Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
  • Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

Preferred qualifications

  • Direct experience designing and building hypergolic propellant test stands or ground fluid systems for spacecraft or launch vehicle programs.
  • Familiarity with Hydrazine, NTO, MMH, UDMH, or red fuming nitric acid (RFNA) handling systems and the associated material, cleaning, and personal protective equipment requirements.
  • Experience coordinating with AHJs, fire marshals, or environmental regulators on permitting for hazardous chemical storage or operations.
  • Background in structural analysis or FEA for test stand structures and pressure vessels.
  • Familiarity with instrumentation and control system interfaces for propulsion test: pressure transducers, flow meters, thermocouples, automated valve control, and emergency shutdown systems.
  • Experience with cleaning, passivation, and cleanliness verification for hypergolic-compatible fluid systems.
  • Familiarity with Colorado Front Range permitting, zoning, or environmental requirements for toxic propellant storage and operations.
  • Active DoD security clearance (Secret or above), or ability to obtain one.

Benefits

  • Best-in-class healthcare: 100% company-paid medical, dental, and vision coverage for you and your dependents, with HSA/HRA options
  • Generous time off: Flexible Time Off (FTO) for exempt employees, accrued PTO of up to 25 days for non-exempt employees, plus 12 paid holidays; Parental Leave; Sick Leave
  • Fuel for your day: Daily catered lunch and unlimited snacks for in-office employees
  • And more: 401(k) retirement plan, fitness reimbursement, and Dog Fridays
  • Equity participation: Equity is included as part of our total compensation package, giving you an opportunity to share in the company’s success.
  • Base Salary: $165,000 to $235,000
  • Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Great fits start here.

Whether you're looking for your next role or your next team member, give people and possibilities a place to meet.